SPZ-52H-22FX

General Type: Heavy-duty industrial/commercial

Brand: Kawasaki

Model: FX691V

Horsepower: 22HP minimum @ 3600 RPM

Type: 4 cycle gas, forced air-cooled, OHV, twin-cylinder, vertical shaft engine

Displacement: 726 cc

Cylinder: 2 cast-iron sleeves

Governor: Mechanical governor with variable speed control set at 3600 rpm (±100 rpm), idle set at 1550 rpm (±150 rpm)

Air Cleaner: Large capacity dual element canister air cleaner, chopper-type grass screen

Exhaust: Scag designed, low noise, low temperature, aluminized exhaust

Fuel Pump Group: Pulse-type fuel pump with in-line filter, fixed jet carburetor

Oil Pump Group: Positive displacement Gerotor Oil Pump

Starter/Electrical: 12 volt "maintenance-free" sealed battery (350 CCA) with alternator, solid-state ignition with key start, Electronic spark system Charging System: 13 amp

Fuel Tank: Single 6.5 gallon tank with extra-large easy-fill opening, over-sized fuel cap, fuel gauge, moldedin cup holder and storage tray

Drive Wheels/Tires: 22 x 10.5 - 12 pneumatic tubeless, radius edge, wide offset rims for better traction

Parking Brake: Foot-operated brake with park lock feature. AUSCO disc brakes feature a rotor and caliper style design for maximum holding power.

Frame: Compact frame design with structural steel tube construction, welded. Engineered for an ultralow center-of-gravity for increased incline performance.

Foot Plate: Pierced, extruded steel tread pattern for permanent non-slip traction; rubber iso-mounted to reduce vibration and increase operator comfort.

Type: Hydro drive with two Hydro-Gear ZT-3100 hydro transaxles with charge pumps for independent control of each drive wheel

Transmission Belt Idler: Self-adjusting, self-tightening, with permanently lubricated bearings

Hydro Fluid: 5 qt. system capacity, uses SAE 20W50 fluid and 25 micron filters (one filter per transaxle)

Steering/Travel Control: Twin lever fingertip steering control with gas shock dampeners for smooth, responsive control to each wheel

Axles: 1.125" heavy-duty axle

Wire Harness: 16 gauge wire. Tightly wound protective wire loom. Dielectric grease at major electrical connections.

Safety Group: Seat actuated engine kill, neutral interlock, mower engagement (PTO) switch, parking brake Instrument

Panel: Mounted at the left side of the operating position for easy access. Key switch, throttle, fuses, manual choke, PTO switch. Digital hour meter displays maintenance reminders.

Forward Ground Speed Range: 0 up to 8.5 mph

Reverse Ground Speed Range: 0 up to 5.0 mph

Type: Floating Hero Cutter Deck, adjustable anti-scalping, hybrid design combines out-front and bellymount designs; cutting chamber design provides a fast, manicured cut.

Construction: Dual-plate construction consists of a 10-gauge steel cutter deck top reinforced with an 11-gauge spindle support plate. Deck skirt is 7-gauge.

True Cutting Width: 52.0 inches (122.00 cm)

Cutting Height Adjustment: Foot-operated pedal adjustment with deck easy-access deck latch lever adjusts from operator’s seat, 1-1/2" to 5" in 1/4" increments.

Cutter Blades: Three high-strength cutter blades

Blade Engagement: Electric PTO via Ogura GT2 (108 ft. lb) clutch brake with control panel knob

Caster Wheels: 13 x 5 - 6 caster wheels (4-ply) with maintenance-free igus® iglide® polymer sleeve bearings; dual sealed ball bearings in caster wheel pivots

Spindles: Heavy-duty spindle shaft, aluminum housing, sealed ball bearings, "maintenance-free" design

Idler Arm: Spring-loaded for continuous belt adjustment and longer life, maintenance-free iglide® polymer flange bearing

Spindle Pulleys: Split steel design. Split steel is stronger than stamped or cast-iron pulley designs.

Cutter Deck Belts: B-section with Kevlar cord

Anti-Scalp: One roller on left-front edge, two rollers on center-front edge, skid plate at rear-center

Deck Leveling: Four corner deck leveling system provides precise adjustment of pitch and level Discharge

Chute: Highly flexible discharge chute will not dent and is easy on landscaping features

R.O.P.S.: OSHA 1928 certified roll-over protection system. System has foldable design for loading into enclosed trailers. Retractable seatbelt included.

Seat: Ultra-comfortable adjustable suspension seat. Contoured for improved comfort and features armrests.

Cup Holder: Conveniently molded into right-side fuel tank.