General Type: Heavy-duty industrial/commercial

Brand: Kawasaki

Model: FX1000V-EFI

Horsepower: 38.5HP minimum @ 3600 RPM

Torque: 57.8 ft-lbs. (peak)

Type: 4 cycle gas, twin-cylinder, air-cooled, vertical shaft engine

Displacement: 999 cc (61.0 cubic inch) Cylinders: 2 cast-iron cylinder liners

Governor: Mechanical type governor with variable speed control set at 3600 rpm (±100 rpm), idle set at 1400 rpm (±150 rpm)

Air Intake Group: Large capacity 2-stage canister air filter

Exhaust Group: Side-mount single canister

Fuel Pump Group: Pulse-type fuel pump with in-line filter; twin-barrel, internally vented carburetor with fuel shut-off solenoid

Oil Pump Group: Full pressure lubrication with oil filter

Starter/Electrical/Charging System: 12 volt "maintenance-free" sealed battery (350 CCA) with alternator, solid-state ignition with key start. 20 amp charging system- regulated

Fuel Tank: Dual tanks, 13 gallon (49.21 liters) seamless tanks with fuel gauges. Mounted low to lower the center-of-gravity for increased hillside stability. Extra-large, angled filler neck for easy filling.

Drive Wheels/Tires: 24 x 12 - 12 four-ply pneumatic tubeless, radius edge for reduced turf tearing

Parking Brake: Foot-operated brake with park lock feature. Internal wet brake system.

Frame: Compact frame design with welded, structural steel double-tube construction. Engineered to provide a low center-of-gravity for increased stability on inclines.

Type: Hydro drive with two Hydro-Gear ZT-5400, 2-speed integrated transaxles for independent control of each drive wheel

Hydro Pumps (internal): 16cc pump displacement

Drive Wheel Motors (internal): 21cc motor displacement

Transmission Belt Idler: Self-adjusting, self-tightening

Hydro Fluid Cooling Group: 10 qt. system capacity with dual nylon fluid reservoirs, 9" fan mounted on each unit, uses SAE 20W50 fluid and 40 micron filter

Steering/Travel Control: Twin "Quick-Fit" lever fingertip steering control with gas shock dampeners for smooth, responsive control to each wheel; 3-position dampener mounting for adjustable feel and control

Axles: 1.375" heavy-duty, tapered axles Wire Harness: 14 and 16 gauge wire. Tightly wound protective wire loom. Dielectric grease at major electrical connections.

Safety Group: Seat actuated engine kill, neutral interlock, mower engagement (PTO) switch, parking brake Instrument

Panel: Key switch, throttle, fuses, manual choke, PTO switch, Tiger Eye Advanced Monitoring System Forward Ground Speed

Range: 0 up to 16.0 mph in high-range; 0 up to 12.0 mph in low-range

Reverse Ground Speed Range: 0 up to 8.0 mph in high-range; 0 up to 5.0 mph in low-range

Type: Velocity Plus, floating, adjustable, anti-scalping, hybrid design combines out-front and bellymount designs, special raised front edge allows grass to enter the deck standing upright for a fast, manicured cut.

Construction: Tri-Plate construction consists of a 10-gauge steel cutter deck top reinforced with 7-gauge upper support plate and an 11-gauge lower spindle support plate. These three layers of steel equal close to a 1/2" thick steel cutter deck top. Deck skirt is 7-gauge. Trim side wear pad protects deck and landscape.

True Cutting Width: 61.0 inches (155.0 cm)

Cutting Height Adjustment: Adjustable foot-operated pedal adjustment from operator’s seat, 1-1/4" to 5" in 1/4" increments; 3-position adjustable pedal accommodates various operator heights

Cutter Blades: Three (3) 21" high-strength blades

Cutter Deck Baffles: Velocity Plus deck baffles direct air flow for maximum quality-of-cut. Custom Cut Baffle allows adjustment to individual cutting conditions (7 positions).

Blade Engagement: Electric PTO via Ogura GT5 (300 ft. lb) clutch brake with control panel knob

Discharge Opening: Extra wide 18.5" tapered discharge opening. Spring-loaded, non-denting plastic discharge chute combines strength and flexibility. Minimizes damage to landscape and trees. Turbo-Baffle increases discharge velocity for an even spread of clippings.

Caster Wheels: 13 x 6.5 x 6 caster wheels with tapered roller bearing pivots Spindles: Heavy-duty 1-1/8" top dimension spindle shaft, cast-iron housing, tapered roller bearing, low maintenance with top access grease fitting and grease overfill relief poppet.

Spindle Pulleys: Split steel design with easily removed tapered hubs. Split steel is stronger than stamped or cast-iron pulley designs.

Cutter Deck Belts: B-section with Kevlar cord

Anti-Scalp Rollers: Two front corner, adjustable; three front-center, adjustable; two rear-center, fixed

Operator Suspension System: Isolates the operator platform via an adjustable coil-over shock and the seat via rubber isomounts. The operator platform (seat and foot plate) is suspended to deliver a smooth ride, with only three moving parts.

Seat: Ultra-comfortable, 4-point iso-mounted, bolstered seat with armrests. Mid-back, thick cushioning.

R.O.P.S.: OSHA 1928 certified roll-over protection system. System has fold-away design for easy transport and storage. Retractable seatbelt included.

Tiger Eye Advanced Monitoring System: Blue backlit monitoring screen is IP67 rated. Gauge monitors crucial system and safety functions; integrated hour meter and much more (functions vary by model)

Flat-Free Caster Tires: Semi-pneumatic caster tires eliminate downtime resulting from flats.